Introduction
Routing Section
The 32Classic MS provides a unique Routing Section that includes output level control, with routing and panning to a
stereo mix bus. When a 32Classic MS unit is used on its own, only the FADER potentiometer and 0dB output level
controls are utilized. When multiple 32Classic MS (Mix Strips) are connected the panning, routing and mix output controls
can be used.
Features
- 32Classic Mic Preamp with Jensen transformer.
- Separate Line input with level trim.
- 48v phantom power.
- -20dB Pad.
- Polarity Reverse.
- Input Signal Meter LED.
- Front Panel Mic (XLR).
- Front panel instrument ¼” jack (HiZ).
- Balanced insert point (INS).
- Harrison 32Classic 4 band parametric EQ w/proportional Q.
- Harrison legendary High Pass and Low Pass filters.
- Output level control (FADER) with 0dB switch.
- Stereo mix bus routing section w/ pan and bus assign switch.
- Master stereo bus level control and LR meters (used when connected to other units).
- 19” 1RU design.
- AC power pass through for connected units.
Installation
Unpacking
The unit has been carefully packed and inside the box you will find the following items.
- 32Classic MS
- IEC power cord for your country
- Safety Sheet
- 1 Bus Link Cable and 1 Sum Link Cable
It is always a good idea to save the original box and packing just on case you ever need to send the unit in for service.
Rack Mounting, Heat and Ventilation
The 32Classic MS is a 1U, 19” rackmount piece of equipment designed to sit in the racking of a producer’s desk or similar.
It is recommended that ventilation space is left above and below the unit so any heat generated by the 32Classic MS or
other equipment mounted above or below the 32Classic MS can naturally disperse. Always allow the unit to cool down
before handling.
Safety Notices
Please read the safety notice information included on the Safety Sheet inside the box before using the 32Classic MS. This
information is also available in Appendices section of this User Guide.
5 32Classic MS
To Next Page
Loading...