To edit or modify an Imprint Memory:
1. As supervisor:
From the main menu, select the path: Favorites Imprint memories
2. Select an Imprint Memory in the list.
3. Press Modify.
The Imprint Memory modification screen is displayed.
4. Select the parameter you want to modify.
5. Change the parameter, then press OK.
6. Press [OK] to validate or cancel to quit.
How to Delete an Imprint Memory
You have to connect as a Supervisor (see How to Log in as Supervisor on page 236).
To delete an Imprint Memory:
1. As supervisor:
From the main menu, select the path: Imprint memories
2. Select an Imprint Memory in the list of the memorized imprint memories.
3. Press [OK] to validate.
4. Select the menu path Delete.
A confirmation message is displayed.
5. Press Yes or No to confirm to delete the Imprint Memory or not.
256
| Page 256 | Oct-05-2016 11:35 |
8
Configuring the System
To Next Page
Loading...
