To Next PageTo Next PageWhat to do if my Hasler Measuring Instruments SOUND 2 does not start?
If the SOUND 2 does not start, first, check that the power cable is correctly connected on the customer side and that the power connector is correctly attached to the unit. Also, if an SD card is inserted, wait for the end of the SOUND2 boot cycle from the card, then remove the SD card and restart the device.
Why are no frequencies being received by my Hasler Measuring Instruments?
If no frequency is being received, ensure the microphone is correctly positioned on the mill. Also, verify that the microphone cable is properly connected to both the microphone and the circuit board.
What to do if my Hasler Sound 2 show Memory 2 error?
If a Memory 2 fault occurs, reset the alarm. If the alarm persists, contact HASLER customer service, as the component may be defective.
General| Brand | Hasler |
|---|---|
| Model | Sound 2 |
| Category | Measuring Instruments |
| Language | English |
