Troubleshooting
Your camera is built to give long and trouble-free service. If however you encounter any operating
difficulties because you are not familiar with the Hasselblad camera system, the following table may
help to resolve them.
PROBLEM POSSIBLE CAUSE
REMEDY
You cannot operate the The magazine slide is
Remove the slide
release button sti
ll
in
place
The film
is
finished
Load a new film
The camera is
in
the
Wind the camera
released position
The release button
The time exposure lock
Return the lock to the
remains depressed
is
in
the T-position O-position
There is
no
image on
The camera
is
in
the Release and/or wind the
the focusing screen
pre-released or released camera
position
You cannot remove the
The camera
is
in
the
Release and/or wind the
front protective cover
pre-released or released
camera
position
You cannot attach the
The camera is
in
the
Release and/or wind the
lens
pre-released or released
camera
position
The lens shutter is
in
Cock the lens shutter
the released position
You cannot remove
The camera is
in
the
Release and/or wind the
the lens
pre-released or released
camera
positi
on
You cannot remove the
The magazine slide is
Insert the magazine slide
magazine
not fully inserted
until it is positively stopped
33
To Next Page
Loading...
Need help?
General
