10
Opening the Focusing Hood
Lift the lid firmly by the grip at the rear edge, and
swing it
u~
to the vertical position.
The Built-in Magnifier
The magnifier flips up into the viewing position
when the oval button inside the lid is moved
in
the
direction of the arrow.
To fold the magnifier down simply press it back
with a fingertip until
it
locks into the lid.
The magnifier may be changed for a correction
lens. See page 21.
Closing the Focusing Hood
"Pinch"
in
the side plates at the hinge points, and
fold the lid down.
The Winding Crank
One full revolution of the winding crank winds the
camera, cocks the shutter and transports the film
one frame.
Removing the Winding Crank
It
is
preferable that the camera be fully wound
when the crank
is
being removed or replaced.
To remove the crank, you depress the latch
button
in
the centre of the winding crank and turn
the crank - counter clockwise.
Attaching the Winding Crank
Place the winding crank against the camera's
winding crank bayonet with the smaller crank
index opposite the camera index. Push
in
the
crank lightly and turn it
in
a clockwise direction
until the larger crank index aligns with the cam-
era index and the crank locks
on
.