EasyManua.ls Logo

Hatz 2-4L41C - Procedure for Long-Term Machine Storage

Hatz 2-4L41C
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Storage and disposal 2-4L41C, 2-4M41(Z), 4L42C, 4M42
106
HATZ
Manual
Storing the machine for a lengthy period
Take the following measures if you intend to take the machine out of service
for a lengthy period (3-12 months):
Step Activity
1 Drain the fuel tank until it is nearly empty and fill with FAME*-
free fuel. Operate the engine for a few minutes so that only
FAME-free fuel is still in the fuel system.
2 Change the engine oil and oil filter (see chapters 8.2.5 Change
the engine oil, page 68and 8.2.14 Changing the oil filter, page
86).
3 Change the fuel filter (see chapter 8.2.15 Change the main fuel
filter, page 87).
4 Let the machine cool down.
5 Remove the battery in accordance with the machine operators
manual and store at ambient temperature. Comply with the local
regulations as well as the regulations of the battery manufac-
turer for the storage of batteries.
6 Close and seal all engine openings (air intake openings, air out-
let openings and the exhaust gas opening) so that no foreign
bodies can enter, but a small amount of air can still be ex-
changed. This avoids condensation.
7 After the machine has cooled down, cover it to protect it against
dust and store it in a dry and clean place.
*FAME = Fatty Acid Methyl Ester
Ambient conditions during storage
Max. permissible storage temperature: -25°C to +60°C
Max. permissible humidity: 70%
Protect the engine from direct sunlight

Table of Contents

Other manuals for Hatz 2-4L41C

Related product manuals