EasyManua.ls Logo

Hatz 2-4L41C - 6 Transport, Assembly, and Commissioning; Safe Engine Transport Procedures and Conditions

Hatz 2-4L41C
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-4L41C, 2-4M41(Z), 4L42C, 4M42 Transport, assembly and commissioning
HATZ
33Manual
6 Transport, assembly and commissioning
6.1 Transport
Safety notes
WARNING
Danger of injury from improper lifting and transport.
Danger of crushing from falling or tipping of the engine.
Only use the lifting eye already mounted on the machine for
lifting.
Only use a suitable hoist with a sufficient carrying capacity.
Do not remain under suspended loads.
CAUTION
Only use the lifting eye for transporting the engine.
Do not use for lifting the entire machine.
CAUTION
Danger of injury from overloading the body.
Lifting the machine to transport it or to move it to another loca-
tion can lead to injuries (of the back, for example).
Only lift the machine with a hoist.
NOTICE
Danger of environmental damage from leaking fluid.
If the machine is tilted, engine oil and fuel can run out.
Only transport the machine in an upright position.
Transport conditions
When transporting the machine, follow the safety instructions.
When transporting, follow the applicable safety and accident prevention
regulations of the trade associations.
After delivery, check the machine for completeness and transport damage.
Only transport the machine when it is switched off and has cooled down.
If you have questions on transporting the machine, please contact your
nearest HATZ service station. For contact data, see chapter 1 Impres-
sum, page 5 or www.hatz-diesel.com.

Table of Contents

Other manuals for Hatz 2-4L41C

Related product manuals