EasyManua.ls Logo

Hatz 2-4L41C - Page 110

Hatz 2-4L41C
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Declaration of the manufacturer 2-4L41C, 2-4M41(Z), 4L42C, 4M42
110
HATZ
Manual
Declaration by manufacturer
on compliance with Regulation (EU) 2016/1628
The undersigned: Manfred Wührmüller, Head of Quality Management GMQ
Hereby declares that the following engine type/engine family (*) complies in all respects with the
requirements of Regulation (EU) 2016/1628 of the European Parliament and of the Council (
1
),
Commission Delegated Regulation (EU) 2017/654 (
2
), Commission Delegated Regulation (EU)
2017/655 (
3
) and Commission Implementing Regulation (EU) 2017/656 (
4
) and does not use any defeat
strategy.
All emission control strategies comply, where applicable, with the requirements for Base Emission
Control Strategy (BECS) and Auxiliary Emission Control Strategy (AECS) set-out in section 2 of Annex
IV to Delegated Regulation (EU) 2017/654, and have been disclosed in accordance with that Annex and
with Annex I to Implementing Regulation (EU) 2017/656.
1.1. Make (trade name(s) of manufacturer):
Hatz
1.2. Commercial name(s) (if applicable):
Hatz-Diesel
1.3. Company name and address of manufacturer:
Motorenfabrik Hatz GmbH & Co. KG, Ernst-Hatz-Str. 16, 94099 Ruhstorf a.d. Rott
1.4. Name and address of manufacturer's authorised representative (if any):
1.5. Engine type designation/ engine family designation/ FT (*):
2L/M41-vs, 2L/M41-cs
(Place) (Date):
(
1
) Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to
gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile
machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive
97/68/EC (OJ L 252, 16.9.2016, p. 53).
(
2
) Commission Delegated Regulation (EU) 2017/654 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the
European Parliament and of the Council with regard to technical and general requirements relating to emission limits and
type-approval for internal combustion engines for non-road mobile machinery (OJ L 102, 13.4.2017, p. 1).
(
3
) Commission Delegated Regulation (EU) 2017/655 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the
European Parliament and of the Council with regard to monitoring of gaseous pollutant emissions from in-service internal
combustion engines installed in non-road mobile machinery (OJ L 102, 13.4.2017, p. 334).
(
4
) Commission Implementing Regulation (EU) 2017/656 of 19 December 2016 laying down the administrative requirements
relating to emission limits and type-approval of internal combustion engines for non-road mobile machinery in accordance
with Regulation (EU) 2016/1628 of the European Parliament and of the Council (OJ L 102, 13.4.2017, p. 364).
(
5
) Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on electronic identification and
trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC (OJ L 257, 28.8.2014, p.
73).

Table of Contents

Other manuals for Hatz 2-4L41C

Related product manuals