Operation and use 2-4L41C, 2-4M41(Z), 4L42C, 4M42
40
HATZ
Manual
Model with manual fuel pump
Only for 4L42C and 4M42
1 Bleed screw
2 Filter
3 Rubber ball
Procedure
Step Activity
1 If there is air in the fuel system:
Fill with fuel if necessary.
2 Place a suitable container under the filter (2) to collect emerging
fuel.
3 Open the bleed screw (1) by approx. one turn.
4 Squeeze and release the rubber ball (3) repeatedly until fuel
emerges from the bleed screw (1).
5 Close the bleed screw (1) and then activate the rubber ball two
more times.
To Next Page
Loading...
