EPA CERTIFIED ENGINES 2G40, 2G40 H
82
HATZ
Operator’s Manual
MAINTENANCE AND WARRANTY.
SUPPLEMENTAL INFORMATION TO THE OWNER‘S MANUAL FOR MODEL
YEAR 2017 EPA CERTIFIED NONROAD COMPRESSION IGNITION ENGINES.
The following supplemental information is furnished for EPA Nonroad Com-
pression Ignition Engines which are certified according to 40 CFR Part 89
and Part 1039.
This information contains the following specific items:
▪ EPA-related engine parts and engine operating conditions
▪ Maintenance instructions for EPA-related engine parts
▪ Emission control system and adjustments
▪ Warranty statement
▪ Emission-related installation instructions
ENGINE PARTS AND / OR EQUIPMENT RELATED TO EPA EXHAUST
EMISSION REGULATIONS.
Parts which are mandatory for engine operation.
The following parts as manufactured according to HATZ specifications are
mandatory for engine operation which meets EPA exhaust emission regula-
tions.
▪ Fuel Injection pump
▪ Injection nozzle
▪ Extra fuel device
▪ Crankcase breather valve assembly
▪ Air cleaner housing
▪ Intake manifold
▪ Exhaust manifold
▪ Oil filler cap
▪ Intake and exhaust gaskets at head interfaces
▪ Emission Control Information Labels
Only parts manufactured by Hatz and which have passed the Hatz Quality
Assurance Program are assured of meeting EPA exhaust emission regula-
tions.
UNUSUAL OPERATING CONDITIONS.
The engine must not be operated at a load factor less than 25 % for an ex-
tended period as such operation will cause the fuel injector to foul. If such a
condition occurs, you should contact the nearest HATZ authorized Service
Center for necessary repairs.
The engine is designed and adjusted to operate most efficiently at the follow-
ing conditions:
To Next Page
Loading...
