37
5. MAINTENANCE.
5.1. GENERAL RECOMMANDATIONS.
The maintenance operations described in this manual are for normal conditions of use.
In harsh conditions (high temperature, high humidity, polluting atmosphere, high altitude, etc.) some
operations must be performed more often and special precautions must be taken:
on this subject, consult PINGUELY HAULOTTE After-Sales Department.
Only authorised, competent personnel can maintain the machine, and they must respect the safety
instructions relative to personnel and environmental protection.
For engine maintenance, refer to the manufacturer's manual.
Check periodically that the safety devices are working properly:
Tilt: buzzer + stop (travel and lift are cut out).
Platform overload: load > 200 kg causes buzzer + full cut-out of all movements.
WARNING:
• do not use the machine as an earth for welding.
• do not weld without disconnecting the (+) and (-) lugs of the batteries.
• do not start other vehicles with the batteries connected.
5.2. MAINTENANCE CHART.
INGREDIENT SPECIFICATION
Lubricants used by
PINGUELY HAULOTTE
ELF TOTAL
Engine oil SAE 20 W
ESSO
HD x 30
PERFORMANCE
XC 30
RUBIA S 30
Housing oil SAE 90
ESSO
EP 80 W 90
TRANSELF
EP 80 W 90
TM 80 W/90
Hydraulic oil
AFNOR 48602
ISO VG 46
BP
SHF ZS 46
HYDRELF
DS 46
EQUIVIS
ZS 46
Extreme-pressure
lithium grease
ISO - XM - 2
Lead-free grease Grade 2 or 3
ESSO
GP GREASE
MULTIMOTIVE 2
MULTIS
EP 2
Lithium grease ENS / EP 700
To Next Page
Loading...
Need help?
General
