Thank you for investing in a HAUSSMANN XPERT power tool. These products have been made to demanding, high-
quality standards and are guaranteed for domestic use against manufacturing faults for a period of 36 months from the
date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of your tool (failure, missing part, etc.),
please contact one of our service technicians at our toll free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday
to Friday, Eastern time. RONA reserves the right to repair or replace the defective tool, at its discretion.
The product is guaranteed for 36 months if used for normal trade purposes. Any guarantee is invalid if the product has
been overloaded or subject to neglect, improper use or an attempted repair other than by an authorized agent. Heavy-
duty, daily professional or hire usage are not guaranteed. Due to continuous product improvement, we reserve the right
to change the product specification without prior notice.
Register your product
We invite you to register your product online to make future communications easier. To do so, simply visit our website
www.haussmanntools.com.
WARRANTY
168 BS1200168 HEX PLANGE NUT, M6 24
169 BS1200169 SCREW BOLT, M6X12 24
170 BS1200170 HEX HEAD SCREW, M8X45 4
171 BS1200171 PAN HEAD SCREW, M5X10L 5
172 BS1200172 SET SCREW, M4X4L 1
173 BS1200173 FAN COVER 1
174 BS1200174 CHECK RING, STW8 1
175 BS1200175 SPACER 1
176 BS1200176 BALL BEARING, 619-8 2
177 BS1200177 FAN SHAFT 1
178 BS1200178 FAN 1
179 BS1200179 O-RINGS, Ø5.3XØ145 1
180 BS1200180 DUST GUIDE 1
181 BS1200181 TAP SCREW, ST4.8X13L 2
182 BS1200182 RACK 1
183 BS1200183 HEX SOCET HEAD SCREW, M4X20 2
184 BS1200184 FLAT WASHER, Ø8 1
185 BS1200185 ADJUSTMENT STOP 2 3
186 BS1200186 BOLT M3, M3X4 10
187 BS1200187 PIN B 3
188 BS1200188 STOP RING A 3
189 BS1200189 O-RINGS, Ø9XØ1.8 4
190 BS1200190 NUT, M5X21L 5
191 BS1200191 STOP RING B 1
192 BS1200192 ADJUSMMENT STOP 3 1
193 BS1200193 ADJUSTMENT STOP 1 1
194 BS1200194 ADJUSTMENT HANDLE 1
195 BS1200195 COLUMN GEAR 1
196 BS1200196 HEX PLANGE NUT, M5 1
138 BS1200138 SET SCREW, M5X4L 1
139 BS1200139 WING NUT, M8 1
140 BS1200140 HANDLE 1
141 BS1200141 SHAFT 1
142 BS1200142 MOVING BOARD 1
143 BS1200143 COMPRESSONG SPRING 1
144 BS1200144 SPRING MOUNT 1
145 BS1200145 QUIETING BOARD 1
146 BS1200146 PIN, Ø3X16L 1
147 BS1200147 CLAMP LEVER 1
148 BS1200148 SHEATH 1
149 BS1200149 HEX HEAD SCREW, M6X16L 2
150 BS1200150 SPRING WASHER, Ø6 2
151 BS1200151 FLAT WASHER, Ø6 2
152 BS1200152 FENCE 1
153 BS1200153 HEX NUT, M6 1
154 BS1200154 CLAMP 1
155 BS1200155 PIN 1
156 BS1200156 DEFLECTOR 1
157 BS1200157 FALT WASHER, Ø6.4X18X1.6T 1
158 BS1200158 WING SCREW, M6X35L 1
159 BS1200159 HEX WRENCH, M4X70X25 1
160 BS1200160 OPEN END WRENCH, 10X12MM 1
161 BS1200161 STAND ASSEMBLY 1
162 BS1200162 HEX NUT, M8 6
163 BS1200163 FALT WASHER, Ø8 5
164 BS1200164 TAP SCREW, M8X40 1
165 BS1200165 BUMPER 1
166 BS1200166 FOOT B 2
167 BS1200167 FOOT A 2
PARTS LIST (continued)
Key No. Part No. Part Name Qty Key No. Part No. Part Name Qty
31
To Previous Page
Loading...
