Press this key to silence the alarm sound. The visible alarm info can’t be
removed by SILENCE key
Switch on / off the infusion pump.
1.Switch on: in ‘power off’ status, keep pressing this key until LCD screen
displays, and the indicator light is on .
2.Switch off: in ‘switch on’ status, keep pressing this key until hear a sound
“beep” and the indicator light is off.
In ‘stop’ status, keep pressing ‘BOLUS’ key, the pump starts purging; release
this key, purge stops.
During operation, keep pressing ‘BOLUS’ key, the pump starts
bolus infusion (bolus rate preset by the user). Release the key,
bolus infusion stops and the pump continues infusion at original
rate.
1. Clear the alarm for both sound and visible info
2. Back to the previous menu
1. To select the parameter and make it editable
2. Save the setting value
In ‘stop’ status, press this key to start infusion.
Press this key to stop infusion.
Under shutdown status, press this key to open the door and switch on the
machine at the same time. This key is invalid during infusing.
AC/Battery
Indicator light
If on, it indicates there’s AC/DC input;
if off, it indicates there’s no AC/DC input.
1. Indicator light indicates operating status/alarms cases.
2. If the IV set is installed correctly and with no air in line, the indicator light
shall be green after the door is closed, which also indicating the pump is
ready for starting infusion.
3. The green indicator light flashes when the infusion is in normal progress.
4. If high-priority alarm occurs during operation, the indicator light shall turn
red and flash.
5. If middle-priority alarm occurs during operation, the indicator light shall
turn yellow and flash.
6. If low-priority alarm occurs during operation, the indicator light shall turn
To Next Page
Loading...
