Used for upgrading software or transferring infusion history
records. Connect with the PC according with the standard of IEC
60950-1-2005 Information technology equipment - Safety -
Part 1: General requirements to output infusion records to PC.
Note: This process must be carried out when machine in
non-infusion state.
This port for DC12V; Drop sensor port works with Hawkmed
drop sensor only.
Used to connect with Hawkmed workstation
6.5 Label
6.5.1 Product label (on the back shell)
The label contains information such as manufacturer, date of production, product serial No.,
classification, waterproof level, etc.
6.5.2 Symbols and significance
(Table 1)
Caution, consult accompanying documents
Please refer to instruction manual
To Next Page
Loading...
