Hawk Hawk-i1 User Manual

70 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

Hawk-i1 INFUSION PUMP

USER MANUAL

Version: V2.0.1

Shenzhen Hawk Medical Instrument Co. Ltd.

Please read the manual before using the product.

Please keep the manual for reference！

057-00088-00

Table of Contents

Questions and Answers:

C
Colin MahoneyAug 4, 2025
Why does my Hawk Hawk-i1 keep giving an Air Bubble alarm?
- T
  Tiffany Daugherty PhDAug 4, 2025
  The frequent Air Bubble alarm on your Hawk Water Pump could be due to a couple of reasons. It might be that the IV set is too soft or thin, in which case you should replace it. Alternatively, there may be a small air bubble in the IV set. Try selecting a higher-level air bubble filter. Note: After changing the pressure level, closely observe the patient's condition. If they feel uncomfortable, stop the infusion and revert to the previous pressure level immediately.
T
Tiffany WilliamsAug 19, 2025
What to do if there is accuracy discrepancy in Hawk Hawk-i1?
- D
  Danielle AdamsAug 20, 2025
  If you're experiencing accuracy discrepancies with your Hawk Water Pump, consider the following: * The IV set might not be calibrated, so calibrate its accuracy. * The IV set you're using might not match the default brand. If that's the case, select the correct brand of IV set. * Variations in weather and temperature can cause the pump's internal parameters to be incompatible with the IV set. Try re-calibrating the accuracy of the IV set. * If none of these steps work, certain parts of the machine may be defective, and you should contact the distributor or manufacturer for repair.

Hawk Hawk-i1 Specifications

General

Brand	Hawk
Model	Hawk-i1
Category	Water Pump
Language	English

Summary

2. INTRODUCTION

2.1 FEATURES

Details the key functionalities and characteristics of the infusion pump.

2.2 MAJOR USES AND SCOPE OF APPLICATION

Explains the intended uses and application areas for the device.

5. INSTALLATION AND ADJUSTMENT

5.1 INSTALLATION CONDITIONS AND TECHNICAL REQUIREMENTS

Specifies the necessary environmental and technical conditions for setup.

5.2 INSTALLATION METHOD AND CAUTIONS

Provides step-by-step instructions and important warnings for installation.

7. PRECAUTIONS FOR PREPARATION AND OPERATION

7.1 PREPARATION AND INSPECTION BEFORE USE

Outlines essential checks and preparations required before operating the pump.

7.2 OPERATION PRECAUTIONS

Lists critical safety measures and guidelines to follow during pump operation.

8. OPERATION METHOD

8.1 INFUSION OPERATION

Detailed procedure for performing infusion with the device.

8.2 ALARMS AND SOLUTIONS

Explains common alarms, their causes, and troubleshooting steps.

8.4 SYSTEM SETTING

Guides users on configuring various system parameters and settings.

9. TROUBLESHOOTING

10. SAFETY INVENTION AND TROUBLESHOOTING

10.1 SAFETY INVENTION AND PRECAUTIONS

Covers safety features and precautions related to device protection and usage.

11. MAINTENANCE, INSPECTION, REPAIR AND RECOVERY

11.1 ROUTINE MAINTENANCE

Outlines daily cleaning procedures for the infusion pump.

11.3 REGULAR INSPECTION

Details periodic inspection tasks to ensure continued proper function.

16. EMC INFORMATION

APPENDIX 1

TABLE 1 CLASSIFICATION OF ALARMS AND COLOR OF ALARM INDICATOR LIGHT

Categorizes alarms by priority and describes indicator light behavior.

TABLE 2 ALARM CONDITIONS AND ALARM SIGNAL DELAY

Details the conditions that trigger alarms and their corresponding signal delays.

APPENDIX 2

FLOW ACCURACY TEST METHOD FOR INFUSION PUMP

Describes the procedure for testing the accuracy of fluid delivery.

Related product manuals

Preview: Hawk HFR Series

Hawk HFR Series

Preview: Hawk s1