(Fig. 8：Rate Mode) (Fig. 9)
After entering parameter setting interface of Rate mode, press to choose the
parameter to be edited, it will be marked with blue rectangle background. Press OK key,
the blue rectangle disappears, then the current editable position will be marked white
rectangle background, input the value according to (Fig. 9). Rate and VTBI are
adjustable, after confirming, press OK to save.
If want to reselect the infusion mode, press to return.
（2）Time Mode
(Fig. 10 Time Mode)
After entering parameter setting interface of Time mode, press to choose
parameter item to be edited, it will be marked with blue rectangle background. Press
OK key, the blue rectangle disappears, then the current editable position will be
marked white rectangle background, input the value according to (Fig. 9), VTBI and
Time are adjustable, after confirming, press OK to save.
Rate will be automatically calculated by system according to VTBI and Time, and
To Next Page
