AppleTalk is a data communication protocol often used by
Macintosh computers. The HPS1P can use these parameters to
join the AppleTalk network and share printers with other
AppleTalk workstations. You have to setup the “Zone Name”
and “Printer Type” for each printer port of this print server.
Zone Name: The HPS1P has to join an AppleTalk zone before
it can be shared with other workstations. Only workstations in
the same zone can share the printer. If you want to share the
printer to all workstations in all Zones, you should enter an “*”
in the “Zone Name” field.
Printer Type: This is the type of printer attached to each
printer port. You can get the printer type from the
manufacturer of the printer.