3.2 Administrator Installation and Setup
WINDOWS 95/98/ME/NT/2000/XP
1) POWER ON: After you have correctly connected your print
server to your PC, router, and printer, please power on all
units.
2) Before the installation, please verify that your network
protocols (TCP/IP, IPX and/or NetBEUI) and printer drivers
are installed on your PC. If they are not installed, please
consult your operating system’s and/or printer’s manual(s)
for instructions on how to do so.
3) Make sure your Windows firewall is disabled if you are using
Windows XP Service Pack 2. Please check the Windows
help menu for more information on disabling this feature.
4) Run The Installation Wizard
i. Insert the Windows 95/98/ME/NT/2000/XP Setup CD into
your CD-ROM drive.
(Windows should execute the Autorun.exe program
automatically. If not, run Autorun.exe manually from your
CD-ROM drive’s root directory.)
2. The Hawking Installation Windows manager will pop up on
your screen as follows:
To Next Page
Loading...
Need help?
General
