Hawking HPS1P User Manual

12.1 Mac Only Environment
If you are installing your print server in a “Mac only” environment and you
have not previously configured the print server, please make sure you press
down the “reset button” for 10 seconds continuously to reset the print server
to the factory default settings with an IP address of 192.168.1.250.
Plug the print server via an Ethernet cable directly to your Mac OS X+
computer. Change your computer’s network IP settings temporarily to
192.168.1.100.

Hawking HPS1P Specifications

General

Brand	Hawking
Model	HPS1P
Category	Print Server
Language	English