Hawking HPS1P User Manual

12.2 Mac or Mac + PC Environment
1) Open the "Applications:Utilities:Print Center" on your Mac computer
2) Click 'Add' (to add a new printer)
3) Select 'IP Printing' from the upper pop-down (If you have Mac os 10.3,
make sure select LPD/LPR).
4) Enter your print server’s IP address: 192.168.1.250 (or whatever your
print server is set to) in the 'Printer Address' field.
5) Deselect 'Use default queue on server'
6) Enter 'lpt1' as 'Queue Name' if your print server is using the first port.
(For HPS12U, and the HWPS12UG - lpt1 is p1, lpt2 is u2, lpt3 is u3)
7) Select 'printer' from the 'Printer Model' field.
8) Select your printer series, from the 'Model list'
9) Click the 'Add' button to complete your setup.
Now you have set up your print server to work on your network. The name
of your printer will be 'lpt1 on 192.168.1.250' if you used that IP address to
set up your print server.

Hawking HPS1P Specifications

General

Brand	Hawking
Model	HPS1P
Category	Print Server
Language	English