Hawking HPS1P - Other Telnet Management Commands

11.5 Other Commands
11.5.1 ipconfig
The “ipconfig” command is used to quickly get the IP settings
(IP, subnet mask, default gateway) of the print server:
admin# ipconfig
IP_ADDR=192.168.2.1
SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.2.254
11.5.2 reboot
The “reboot” command is used to restart the print server:
admin# reboot
11.5.3 exit
The “exit” command is used to leave the print server telnet
management:
admin# exit
11.5.4 help
The “help” command is used to list all telnet management
commands of the print server:
admin# help