10. Once the Setup Wizard is activated, it will make sure you
have the necessary components to proceed with installation.
Please make sure you have connected your print server to
your network via an Ethernet connection, powered up your
printer and print server, and have connected the print server
to your printer.
Once the Setup Wizard has verified your settings, please
click on the “Next” button to continue. If there is a problem
with your setup, the Print Server Wizard will inform you of it
and provide you with a diagnostic solution. You may choose
to skip this initial network and print server diagnostic screen
by clicking on the “Skip” button if the Wizard determines
that you do not have the necessary components to proceed.
To Next Page
Loading...
Need help?
General
