18. The final configuration screen will allow you to print a test
page using the newly installed print server.
Please highlight the appropriate printer and press the “Print Test”
button to verify that your print server is properly configured.
There may be a short delay the first time you print to the print
server. If there is a problem printing the test page, please remove
and replace your printer’s power and make sure your Windows
printer driver is “online” and the “Use Printer Offline” selection is
not checked.
Once you have completed the administrator’s setup, you can perform the
“Client Installation” procedure on all client computers in your network.
To Next Page
Loading...
Need help?
General
