Hawking HWPS12UG User Manual

4. Choose NetWare Configuration from the menu.
5. Select the Print server in the Printing mode field.
6. Change the Alias of the print server if you wish.
7. Set the Primary File Server to be the file server
where the print server’s queue will be located.
8. Press Escape to exit the Print Server
Configuration screen, confirm that the changes
should be saved, and exit PSETUP.
At this point the print server setup is complete. You
can now begin setting up the NetWare print server
and print queue objects:
9. Run the NetWare PCONSOLE program.
10. Change the current file server, if necessary,
using the Change Current File Server menu selection.
11. Choose the Print Queue Information menu
selection.

Hawking HWPS12UG Specifications

General

Brand	Hawking
Model	HWPS12UG
Category	Print Server
Language	English