12
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
Service
• Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety
of the power tool is maintained.
Product Safety Warnings
Chain Saw Safety Warnings:
• Use the tool only with specifically designated battery packs. Use
of any other battery packs will increase the risk of injury and fire.
• Only operate the product in daylight or in good artificial light.
• Do not expose tool and charger to rain or wet conditions. If a
tool or charger is exposed to moisture it will increase the risk of
electric shock, battery damage, fire or explosion.
• Keep all parts of the body away from the saw chain when the
chain saw is operating. Before you start the chain saw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chain saws may cause entanglement
of your clothing or body with the saw chain.
• Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the chain
saw with a reversed hand configuration increases the risk of
personal injury and should never be done.
• Hold the power tool by insulated gripping surfaces only,
because the saw chain may contact hidden wiring. Saw chains
contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
• Wear safety glasses protection. Further protective equipment for
hearing, head, hands, legs and feet is recommended. Adequate
protective clothing will reduce personal injury by flying debris or
accidental contact with the saw chain.
To Next Page
