26
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: To reduce the risk of injury, user must read instruction
manual.
Intended Use
The chainsaw is intended for sawing of trees, tree trunks, branches, wooden
beams, planks, etc. Cuts can be sawed with or across the grain. This product is
not suitable for sawing mineral materials.
WARNING: Before assembly and adjusting to the chainsaw, ensure
the chainsaw is turned off and the battery pack is removed.
CAUTION: Do not touch the saw chain with bare hands. Always wear
gloves when handling the saw chain.
WARNING! Before assembling the chain saw, check all the parts
indicated in the manual are in the box. Inspect all the parts for
signs of damage. Do not assemble the chain saw if you observe any
damaged components.
WARNING! Before using the tool, read the instruction book carefully.
Guide bar and saw chain assembly
CAUTION: Always remove battery packs before assembling the chain saw. When
removing the saw chain, always perform the following steps:
1. Loosen the chain tensioning dial (5) on the sprocket cover counterclockwise.
To Next Page
Loading...
