4
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
SPECIFICATION
Technical Data
Model RLC40HD-SM
Nominal voltage of product with battery 36 (2x18)V d.c./4.0Ah Li-Ion
Bar length 406mm
Cutting length 360mm
Chain speed 15m/s
Oil tank capacity 260ml
Saw chain type Oregon(91PX057X)
Bar type Oregon(160SDEA041)
Weight (chain & bar included) approx. 5.1 kgs
Protection class of charger Class II
Battery pack Model B0P-SP06-18ZK
Battery capacity 18V d.c. 4Ah
Battery charging time Max. 120min
Battery charger Model B0Q-SP07-2040ZB
Battery charger input 220-240V AC, 50/60Hz 120W
Battery charger output 21V d.c. 4A
Sound pressure level L
pA
92.5dB(A); K=3.0dB(A)
Sound power level L
WA
104.8dB(A); K=3.0dB(A)
Guaranteed sound power level L
WA
108dB(A)
Vibration
Front handle 4,2 m/s
2
; K=1,5
Rear handle 4,61 m/s
2
; K=1,5
Note: The above specifications are the MAXIMUM capacities of the tool. Voltage measured
without workload. Initial battery voltage reaches 20 Volts. Nominal voltage is 18 Volts.
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in BS EN 62841 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
To Next Page
Loading...
