Hayter H Series User Manual

Your Hayter Tractor was thoroughly
inspected at the factory prior to delivery to
your dealer. Your dealer, In turn, has
carried out a pre-delivery Inspection before
delivering it to you. There should be no
need for adjustment between services and
we do not recommend that customers
carry out servicing or adjustment to the
transmission and drive belts (Hydrostatic
transmission is sealed for life and can only
be serviced by an authorised agent).
During the warranty period such work
MUST be carried out by your Hayter dealer.
When you are used to your tractor and if it
subsequently develops a jerky take-up or you
believe the drive belt is slipping - check:
1/ Is the drive belt is worn?
2/ If a new belt has been fitted, is it as
recommended?
3/ Is the belt tensioner mechanism working
and not jammed?
If in any doubt call your dealer. Belt type and
tension are critical and can lead to damage to
the engine.
ROUTINE MAINTENANCE
Keep the transmission free of grass and
debris.
WE DO NOT RECOMMEND THAT
CUSTOMERS FIT OR ADJUST
TRANSMISSION DRIVE BELTS.
MOVING OFF •• Hydrostatic gearbox (fig 19)
Select neutral with the Hydrostatic Speed
Control Lever and start the engine. Lift the
brake/clutch pedal before you advance (or puli
back) the Speed Control Lever, and move off.
If this fails to produce fon/vard or backward
movement - check:
1/ That the Dump Valve fitted to machines
with Turf TORQ hydrostatic transmission is in
drive (fig 20)
The bypass lever/dump valve is
found alongside the rear left wheel.
BEFORE CARRYiNO OUT ANY REPAIR OR SERVICING
* Apply the handbrake. ? . ; * Disconnect battery.
* Extinguish all haked^ames.
14

Hayter H Series Specifications

General

Brand	Hayter
Model	H Series
Category	Tractor
Language	English