Hayter H Series User Manual

AIR INTAKE/ COOLING
SYSTEIVl
The cooling fan also supplies
the air to the carburettor so if
the engine won’t start or if it is
stalling or overheating
CHECK THE COOLING
SYSTEM AND THE AIR
FILTERS
1/ Ensure the vents on either
side of the bonnet are not
blocked.
2/ Check that debris is not
caught in the cooling fan cover
- clean with a stiff brush.
3/ Remove the air filter
cartridges and check that
debris is not gathered on the
Pre-Cleaner.
After all three checks you must
consider whether the air filter
cartridge should be replaced.*
The air filter pre~cieaners and
cartridges should be changed
every 100 hrs or at least every
annual service.
ROUTINE MAINTENANCE
Keep the engine compartment
free of grass, leaves, petrol or
excessive grease.
N.B. The information contained
in the following pages is given on
the understanding that Hayter
Limited accepts no responsibility
for work carried out by a
customer or for any damage thus
caused, whether or not the
service instructions have been
misunderstood. To be absolutely
sure that your warranty terms
are not breached, service work
should only be carried out by a
Hayter dealer.
13

Hayter H Series Specifications

General

Brand	Hayter
Model	H Series
Category	Tractor
Language	English