Hayward EcoStar - Page 30

Power cycle
then check
display.
NO
“Check System”
‘PFC-Hi Error’ & ‘Prime Failed’
Error
Cleared
Is error reoccurring AND is
pump connected to
Hayward Automation?
Problem
solved
YES
Wire pump power
to load side of filter
relay and set pump
timer on control.
Inspect
plumbing. Any
air leaks?
NO
Inspect
basket
Lid O-Ring.
NO
Repair and
retry prime.
Prime Failed
(pg. 6-8)
PFC-Hi
(pg. 4-5)
YES
O-Ring
damaged?
YES
Replace
and retry
prime.
Inspect
baskets
& filter.
Debris?
Remove
and retry
prime.
YES
NO
Change ‘Auto
Prime’ to 3
minute prime.
(pg. 8)
Page 28