Hayward TriStar Series User Manual

P/N-IS3200-HC-12
OWNER’S MANUAL
INSTALLATION, OPERATION, & PARTS
TriStar Pump Series & HCP Commercial Series
The Hayward TriStar Pump is Specifically Engineered for the demanding requirements of today’s in-ground
swimming pool/spa that is equipped with large capacity filters, heaters, and pool cleaning equipment. The
TriStar is a self-priming pump that incorporates an improved seal and impeller design that will provide many
years of efficient, dependable, corrosion-free service. The advanced design provides superior performance
while reducing maintenance requirements. NOTE - To prevent potential injury and to avoid unnecessary
service calls, read this manual carefully and completely.
IMPORTANT - READ CAREFULLY
NOTE
- The TriStar is a high performance, high efficiency
pump. When replacing most existing pumps, you can use a
TriStar pump with a lower horsepower rating than the
existing pump. Required: 2” Plumbing minimum.
SAVE THIS INSTRUCTION MANUAL
HAYWARD POOL PRODUCTS CANADA INC.
2880 Plymouth Drive, Oakville, ON L6H 5R4
1.888.238.7665 Haywardpool.ca
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Hayward TriStar Series Specifications

General

Dimensions	Varies by model
Weight	Varies by model
Voltage	115V/230V
Speed Options	Single Speed
Pipe Size	2 inch
Material	Thermoplastic
Discharge Size	2 inch
Suction Size	2 inch
Flow Rate	Up to 150 GPM

Summary

Owner's Manual: Installation, Operation, and Parts

TriStar Pump Series & HCP Commercial Series Introduction

Provides an overview of the TriStar Pump Series and HCP Commercial Series, highlighting key features and initial safety advice.

Important Safety Instructions

General Electrical and Installation Safety

Covers essential safety precautions for electrical installation, including professional installation and hazard awareness symbols.

Pool and Storable Pool Safety Guidelines

Provides safety directives for pool and spa usage, child supervision, and environmental considerations for pump installation.

Electrical Safety and Grounding Procedures

Risk of Electrical Shock and GFCI

Details electrical shock hazards, grounding, bonding, and the necessity of GFCI protection for safe operation.

Entrapment Hazard Prevention

Suction Outlet Safety Requirements

Explains suction entrapment risks (hair, limb, body) and mandates specific safety measures for suction outlets.

Product Specifications and Installation

Pump Dimensions, Specs, and Pipe Sizing

Presents technical specifications, dimensions, and recommended pipe sizing for optimal system flow and performance.

Pump Location and Mounting Best Practices

Offers advice on selecting pump location and secure mounting techniques for efficiency and durability.

Plumbing and Electrical System Setup

Plumbing Connections and Fittings

Guides on proper plumbing techniques, including Teflon tape usage and fitting selection for efficient water flow.

Electrical Wiring and Motor Safety

Outlines critical electrical wiring standards, motor voltage matching, and safety precautions for connections.

Electrical System Details and Specifications

Voltage, Grounding, and Bonding

Covers voltage compatibility, mandatory grounding, and bonding procedures to ensure electrical safety and system integrity.

Pump Wiring and GFCI Requirements

Specifies wiring practices, the need for a licensed electrician, and the role of GFCI for preventing electrical hazards.

Hayward TriStar Pump Replacement Parts

Parts Diagram and Identification

Illustrates pump components and lists part numbers, descriptions, and quantities for replacement purposes.