1: Check System
‘PFC-Hi Error’
This error code will be displayed when the drive detects an overvoltage condition
(AC mains supply exceeding 280volts). It is NOT an indication that something is
wrong with the pump or drive.
Shut off the breaker supplying the EcoStar with
power for at least 2 minutes, verify screen is
blank, then restore power.
Inspect pump display
The error has now cleared. If error frequently
reoccurs AND pump is controlled by Hayward
automation, proceed to step 1C.
Page 4
Power cycle
Step 1A Step 1B
To Next Page
Loading...
