15
X. Trouble shooting for common faults
Failure Reason Solution
Swimming
pool heat
pump
does not
run
No power Wait until the power recovers
Power switch is
off
Switch on the power
Fuse burned Check to change the fuse
The breaker is off
Check to turn on the breaker.
Running
but not
heating
Air inlet blocked Remove the obstacles.
Air outlet blocked
Remove the obstacles.
3minutes
protection
Wait patiently
Set temp too low
Set proper heating temperature.
If the above solution doesn’t work, please contact your dealer. Don’t try to
repair the heater yourself.
To Next Page
Loading...
