2
Remove screws to lid.
3
Remove single
screw to electri-
cal enclosure
cover.
4
Disconnect ozone lamp
from ballast.
5
Carefully lift the lamp assembly, a slight
tug may be necessary to loosen the lamp
from the lamp retention fingers.
6
Insert lamps into lamp holder. lamps
must be aligned and seated securely in
the lamp holder.
7
After power is restored, press and hold
OZONE BULB LIFE Button, for a minimum
of 15 seconds, to reset the lamp life
indicator.
Discard lamp(s) appropriately.
Visit www.lamprecycle.org for instructions on
disposal.
1
Turn Off Power to unit or unplug.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
14
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
To Next Page
Loading...
