Hayward SP2307X10 User Manual

IS2300 Rev D
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 1
MaxFlo XL
™
Pump Series
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
The Hayward MaxFlo XL is a series of high technology self-priming pumps that combine
performance, dependability and value with durable construction. Designed for pools of all types
and sizes, MaxFlo XL features 1 1/2” x 2” union connections to match a variety of plumbing
configurations and a cam and ramp strainer cover that seals with less than a quarter turn. The
MaxFlo XL is an ideal choice for both new construction or as a replacement pump.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
Contents
Full Table of Contents……..…..…2
General Product Warnings…….…3
Installation and Wiring……..….…5
Start up and Operation…………..9
Shaft Seal Replacement………...10
Replacement Parts………..…….…13
Warrantee…………………….…..……15
Re
g
istration………………….………..16
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow
instructions can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.

Hayward SP2307X10 Specifications

General

Brand	Hayward
Model	SP2307X10
Category	Swimming Pool Pump
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Suction Entrapment Hazards

Details hazards like hair, limb, body, evisceration, and mechanical entrapment.

Suction Outlet Maintenance and Hazards

Covers risks from debris, component lifespan, and pressure test plugs in suction outlets.

System Pressure and Component Hazards

Warns about hazardous pressure and separation hazards, and child access prevention.

Electrical Shock Hazards

Electrical Shock Hazards

Details risks of electric shock from improper wiring, grounding, and GFCI usage.

Hyperthermia Risks in Hot Tubs/Spas

Advises on safe water temperatures and precautions for hot tub/spa use to prevent hyperthermia.

Installation and Wiring

Pump Location

Pump Mounting

Plumbing

Electrical Requirements

General electrical safety and compliance requirements, including grounding and bonding.

Grounding and Bonding

Critical steps for safely grounding and bonding the pump to prevent electrical shock hazards.

Wiring Procedures

Instructions for wiring single-speed, dual-voltage, and two-speed motors safely and correctly.

Startup & Operation

Prior to Start-Up

Starting/Priming the Pump

Step-by-step guide for priming the pump, including safety warnings and potential issues.

Shaft Seal Change Instructions

Removing the Motor Assembly

Removing the Impeller

Removing the Ceramic Seat

Seal Installation

Replacing the Impeller and Diffuser

Replacing the Motor Assembly

Troubleshooting

General Problems

Pump Won't Prime

Low Flow Issues

Noisy Pump Causes