Hayward SP2805X7 User Manual

P/N: IS2800X5
Rev. C
__________________________________________________________________________________________
OWNER’S MANUAL
INSTALLATION, OPERATION, & PARTS
Max-Flo
™
PUMP Series
The Hayward Max-Flo™ is specifically engineered for the demanding requirements of today’s in-ground swimming pool/spa that is
equipped with large capacity filters, heaters, and pool cleaning equipment. The Max-Flo™ is a self-priming pump that incorporates
an improved seal and impeller design that will provide many years of efficient, dependable, corrosion-free service. The advanced
design provides superior performance while reducing maintenance requirements.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 351.5400
www.haywardnet.com

Hayward SP2805X7 Specifications

General

Model	SP2805X7
Type	Swimming Pool Pump
Voltage	115/230V
Service Factor	1.25
Warranty	1 Year
Speed	Single Speed
Wet End Material	Thermoplastic
Motor Frame	56J
Horsepower	0.75 HP
Port Size	1.5 inches
Maximum Head	60 ft
Discharge Size	1.5 inches
Suction Size	1.5 inches

Summary

Important Safety Instructions

Suction Entrapment Hazards

Details risks of hair, limb, body, evisceration, and mechanical entrapment.

General Safety Precautions

Hazardous Pressure and Electrical Safety

Hazardous Pressure Warnings

Electrical Safety and Grounding

Covers wiring, grounding, bonding, GFCI, and shock prevention.

Plumbing and Electrical Installation Details

Electrical Wiring Safety Standards

Electrical System Requirements

Grounding and Bonding Procedures

Explains essential steps for grounding and bonding electrical components.

Wiring and GFCI Protection

Details permanent connection requirements and GFCI usage for safety.

Pump Start-Up and Maintenance

Pump Priming Procedure

Step-by-step guide on how to properly prime the pump before operation.

Shaft Seal and Impeller Replacement

Impeller and Ceramic Seat Removal

Seal and Impeller Installation

Troubleshooting Pump Issues

Motor Start-Up and Shut-Off Problems

Diagnosing and resolving issues with motor not starting or shutting off.

Pump Priming and Flow Rate Problems

Solutions for pumps not priming or experiencing low flow.

Product Limited Warranty