What to do if my HBM Amplifier shows 'Transducer present, but has Overflow or Underflow status'?
If your HBM Amplifier shows a 'Transducer present, but has Overflow or Underflow status' error, unfortunately, there's no specific solution provided in the available documentation.
What to do if my HBM Amplifier displays 'No transducer plugged in, faulty TEDS no jumper cable breakage ? TEDS is present, but is not written ? Jumper present (1-wire lead)'?
If your HBM Amplifier indicates 'No transducer plugged in, faulty TEDS no jumper cable breakage ? TEDS is present, but is not written ? Jumper present (1-wire lead)', there's no specific solution provided in the available documentation.
What to do if my HBM Amplifier shows a serious error?
If your HBM Amplifier shows a 'Serious error', try restarting it. If the problem persists, send the module to HBM for further assistance.
How to fix configuration error on HBM Amplifier?
If your HBM Amplifier displays 'Configuration error (e.g. invalid calibration data)', it is recommended to send the module to HBM.
What to do if HBM Amplifier shows 'No adjustment data present'?
If your HBM Amplifier indicates 'No adjustment data present', send the module to HBM.
To Next Page
General
