HBM MX440B - User Manual

Operating Manual
English
Quantum
X

Summary

Safety instructions

Appropriate use

Defines the intended purpose and limitations for using the QuantumX modules.

Electro magnetic conformity

Software

MX Assistant

catmanAP

Connecting individual QuantumX modules

Connecting the supply voltage

Details how to connect power to the QuantumX modules.

Connection to host PC or data recorder

Explains how to connect the system to a PC or data recorder.

Modules and transducers

MX840;A;B universal amplifier

Details the features and specifications of the MX840 universal amplifier.

MX410 B highly dynamic universal amplifier

Details of the MX410B amplifier, focusing on high dynamics.

MX430 B Strain gage fullbridge measuring amplifier

Information on the MX430B amplifier for strain gauge measurements.

MX471 B CAN module

Information about the MX471B CAN module.

Transducer connection

Full bridge, SG

Full bridge, inductive

Full bridge, piezoresistive

Half bridge, SG

Current-fed piezoelectric transducer (ICP;IEPE)

DC voltage sources 10 V

Voltage sources up to 300 V (CAT II)

Thermocouples

Frequency, differential, without directional signal

CAN bus

Functions and outputs

Amplifier with analog outputs

MX878 B

Describes analog outputs and math channels on the MX878B module.

MX879 B Multi‐I;O module

Information on the MX879B module's analog/digital I/O and limit monitoring.

FAQ

HBM MX440B Specifications

General

Brand	HBM
Model	MX440B
Category	Amplifier
Language	English