HBM MX440B - MX1615 B Amplifier

Modules and transducers
132 I3031-14.0 HBM: public Quantum
X
8.11 MX1615B amplifier
Up to 16 freely configurable inputs can be connected to
the MX1615B amplifier.
It supports:
Strain gauges (SG) or SG-based transducers in
S Full bridge circuit (six-wire configuration)
S Half bridge circuit (five-wire configuration)
S Quarter bridge circuit (two, three or four wires for
120 ohms or 350 ohms)
Standardized voltage ("10 V differential or
0 . . . 30 V DC unipolar)
Resistor-based measurement (PT100 or resistor, imple
mented in a quarter bridge arm)
Bridge excitation voltage:
Constant DC voltage or 1200 Hz (AC) square wave car
rier frequency with an amplitude of 0.5 V; 1 V, 2.5 V or 5
V
When TEDS or T−ID is used, the measurement channel
is automatically parameterized after connection.
Extended functionality for MX1615B :
S Potentiometer
When TEDS or TID is used, the measurement channel
is automatically parameterized after connection.