HBM MX1601B User Manual

Operating Manual
English
Quantum
X

HBM MX1601B Specifications

General

Brand	HBM
Model	MX1601B
Category	Amplifier
Language	English

Summary

Safety Instructions

Safety Notice and Appropriate Use

Important safety notices and guidelines for proper module operation.

Software

MX Assistant Software

Overview of the MX Assistant software for device and system configuration.

catman®AP Software Suite

Describes the catman®AP software for measurement data acquisition and analysis.

Connecting Individual QuantumX Modules

Connecting the Supply Voltage

Guidelines for connecting the DC power supply to modules.

PC and Data Recorder Connection

Explains how to connect modules to a host PC or data recorder via Ethernet/FireWire.

Firmware Update via Ethernet

Instructions for updating module firmware using Ethernet and software.

Outputting Signals to CAN Bus

Output Signals via EtherCAT® and Ethernet

Modules and Transducers

Universal Amplifiers Overview (MX840/MX440/MX410/MX430)

Overviews of MX840, MX440, MX410, and MX430 amplifiers and their pin assignments.

Specialized Amplifiers (MX238B/MX460B/MX1609/MX471B)

Details on MX238B, MX460B, MX1609, and MX471B modules and their pin assignments.

MX1601B and MX1615B Amplifiers

Information on MX1601B and MX1615B amplifiers and their pin assignments.

Transducer Connection Methods

9.1 Full Bridge, SG Connection

Wiring diagram and supported modules for SG full bridge transducers.

9.2 Full Bridge, Inductive Connection

Wiring diagram and supported modules for inductive full bridge transducers.

9.3 Full Bridge, Piezoresistive Connection

Wiring diagram and supported modules for piezoresistive full bridge transducers.

9.4 Half Bridge, SG Connection

Wiring diagram and supported modules for SG half bridge transducers.

9.5 Half Bridge, Inductive Connection

Wiring diagram and supported modules for inductive half bridge transducers.

9.6 Quarter Bridge, SG Connection

Wiring diagram and supported modules for SG quarter bridge transducers.

9.9 Potentiometric Transducers

9.10 LVDT Transducers

9.11 Current-fed Piezoelectric Transducer (ICP/IEPE)

Information on ICP/IEPE transducers and supported modules.

9.12 Electrical Voltage 100 mV Input

9.13 DC Voltage Sources 10 V

9.14 DC Voltage Sources 60 V

9.15 Voltage Sources up to 300 V (CAT II)

Details on the SCM-HV module for high voltage measurements.

9.16 DC Current Sources 20 mA

9.17 DC Current Sources 20 mA - Voltage-fed

9.20 Thermocouple Connections

Connection information for thermocouples, including cold junction compensation.

9.21 Frequency, Differential, Without Directional Signal

9.22 Frequency, Differential, With Directional Signal

9.23 Frequency, Single-Pole, With Directional Signal

9.24 Encoder and Pulse Encoder, Differential

9.25 Encoder and Pulse Encoder, Single-Pole

9.26 Rotary Encoder and Pulse Generator

9.27 Absolute Value Encoder with SSI Protocol

9.32 CAN Bus Connections

Information on connecting to and using CAN bus signals.

Functions and Outputs

Amplifier Analog Outputs and Realtime Functions

Details analog outputs, realtime functions like peak value and RMS.

Peak Value and RMS Calculation Functions

MX878B Module Features

Overview of the MX878B's analog outputs, math, and peak value functions.

MX879B Multi-I/O Module Overview

Overview of the MX879B module with analog and digital I/Os.

MX471B CAN Module Functionality

Information on the MX471B module for high-performance CAN bus connection.