Need help?Do you have a question about the HBM ME30 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Input Voltage Range | ±10 V |
| Power Supply | ±12 V to ±18 V DC |
| Signal to Noise Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.01 % |
Defines the intended application and limitations of the ME30 amplifier for safe operation.
Highlights risks from improper use and the need for qualified personnel for installation and operation.
Explains how to connect strain gauge transducers using 6-wire circuits and options for 4-wire technology.
Details the stabilized and unstabilized double-pole supply voltage requirements for the ME30 amplifier.
Guides on selecting measurement ranges, including factory settings and internal/external switching options.
Explains how to perform fine adjustments for measuring ranges using front panel potentiometers.
Explains how to set different measuring ranges using DIP switches or external connections, including fine adjustments.
Specifies the carrier frequency and bridge excitation voltage options for the ME30.
Details the number of measuring ranges, adjustment steps, fine adjustment, and calibration signal values.
Specifies noise levels, linearity deviation, and temperature influence on sensitivity and zero point.
To Next Page
