HBM SCOUT55 User Manual

A0236-5.9 en
Measuring amplifier in
desktop housing
SCOUT55
Operating manual

HBM SCOUT55 Specifications

General

Brand	HBM
Model	SCOUT55
Category	Amplifier
Language	English

Summary

Safety instructions

Appropriate use

3 Setting up and operation

2.8 Connecting the serial interface

3.1 Commissioning and factory settings

Steps for initial setup and function testing of the measurement chain.

3.2 Control concept and functional overview

Provides an overview of the device's control concept and button functions.

3.3 Button functions in measuring mode

Explains the functions of buttons when the device is in measuring mode.

3.3.1 Querying and setting limit values in measuring mode

Explains methods for setting limit values while in measuring mode.

3.4 Button functions in programming mode

Details the functions of buttons when the device is in programming mode.

3.4.1 Changing from “Measuring” mode to “Programming” mode

3.4.2 Programming

3.4.3 Switching from “Programming” operating mode to “Measuring” operating mode

3.5 Overview of all groups and parameters

3.5.1 Setting all parameters

Guides through the process of configuring all device parameters.

3.5.3 Load/Save in parameter set (PARAM. SET)

3.5.4 Adaptation

3.5.5 Calibration (CALIBR.)

Guides on performing amplifier calibration, including unit and nominal value settings.

3.5.6 Limit values 1...4 (LIMITVAL.1...4)

Explains the configuration and function of limit switches.

3.5.7 Set peak value store (PV STORE)

Describes the function and allocation of peak value stores.

3.5.8 Inputs and outputs (IN/OUT)

Details settings for input signal, analogue output, and remotes.

3.5.9 Additional functions (ADD. FUNCT)

4 Example

5 Error messages