HBM ClipX User Manual

Operating Manual | Bedienungsanleitung
English Deutsch
ClipX

HBM ClipX Specifications

General

Brand	HBM
Model	ClipX
Category	Amplifier
Language	English

Summary

Safety Instructions

Intended Use

ClipX Device Types, Scope of Supply

Device Types

Mounting

Mounting on a Support Rail

Electrical Connections, LEDs

Available Connections and LEDs

Health Monitoring, LEDs

Explains the meaning of different LED states for device status and diagnostics.

Connecting the Supply Voltage

Details how to connect the power supply to the ClipX device via terminal X2.

Connecting Transducers

Covers connecting various types of sensors and transducers to the ClipX device.

Connecting the Digital Inputs and Outputs

Explains how to wire and configure the digital input and output interfaces.

Connecting the Analog Output

Describes how to connect and configure the analog output for voltage or current signals.

Using Multiple ClipX Devices, ClipX Bus

Synchronizing Multiple ClipX CF Amplifiers

Starting Up the ClipX

Power-up and Operating Behavior

Describes the initial power-on sequence and normal operational states of the ClipX.

Connecting via Ethernet

Provides instructions for establishing an Ethernet connection to the ClipX device.

Setting the ClipX using a Web Browser

Explains how to configure the ClipX settings through its integrated web interface.

Operation via Fieldbus

Connecting the Fieldbus

Explains how to connect the ClipX to various fieldbus systems as a slave device.

Data Transfer from the ClipX to the Controller

Settings for the Fieldbuses

Outlines minimum configuration settings for PROFINET, EtherCAT, EtherNet/IP, and PROFIBUS.

Flags and Status Bits

Diagnostics and Error Rectification, FAQs

Possible Errors

Lists common issues and provides guidance for initial troubleshooting of the ClipX device.

Technical Support