Electrical connections, LEDs
ClipX
a4643-1.0 HBM: public 31
EtherNet/IP™ LEDs (MS, NS, only BM40IE)
MS
LED
Status Meaning
Off
Off The ClipX is not on.
Green
Flashing
(1Hz)
Standby: The ClipX has not been configured.
On The ClipX is running and error-free.
/
Red/
green
Flashing
(1Hz)
The ClipX is running a self-test.
Red
Flashing
(1Hz)
Simple error: The ClipX has detected a reparable error, e.g.
an incorrect configuration.
On Serious error: There is an irreparable error. Please contact
Technical support at HBM.
NS
LED
Status Meaning
Off
Off The ClipX is not on, or has no IP address.
Green
Flashing
(1Hz)
No network connection. But the ClipX has been assigned
an IP address.
On The ClipX is connected to a network device, e.g. a switch.
/
Red/
green
Flashing
(1Hz)
The ClipX is running a self-test.
To Next Page
Loading...
