Electro magnetic conformity
Quantum
X
I3031-14.0 HBM: public 15
2 Electro magnetic conformity
Additional information about the relevant EMC standards
EN 61326-1 / EN61326-2-x.
These standards define emissions limits and immunity
requirements for different environments.
Emissions requirements are defined for the following en
vironments:
- Industrial (Class A) or
- Residential / Laboratory (Class B).
The standard refers to CISPR 11:2009+A1:2010.
Immunity requirements are defined for the following envi
ronments:
- Controlled electro-magnetic (lowest requirements)
- Basic or
- Industrial (highest requirements).
The modules listed in the declaration of conformity com
ply with the requirements for the following environments:
Emissions: Class A
Immunity: Industrial environment
The QuantumX series and its modules are intended for
use in an industrial environment. When used in
residential or commercial environments, additional ar
rangements may be required to limit electro-magnetic
emissions.
An example is voltage supply of the modules by battery.
In this case please wrap the power supply cable
To Next Page
Loading...
