Introduction
20 I3031-14.0 HBM: public Quantum
X
S After installation of the QuantumX Assistant on the
hard drive of your PC, which can be reached through
the Windows start menu
S Up-to date versions are always available from our In
ternet site at www.hbm.com/hbmdoc
4.2 The QuantumX family
The QuantumX family is a modular measurement system
for universal applications. The modules can be individu
ally combined and intelligently connected according to
the measurement task. Distributed operation makes it
possible to position individual modules close to the meas
uring points, resulting in short sensor lines.
The QuantumX family consists of the following
modules:
S MX840B Universal amplifier
The module has 8 universal inputs and supports more
than 15 transducer technologies.
S MX440B Universal amplifier
Like the MX840B, but with 4 inputs (connections 5-8
of MX840B, without CAN).
S MX410B Highly dynamic universal amplifier
The module has 4 universal inputs and supports com
monly used transducer technologies (at a sampling
rate of up to 96,000 measured values per channel per
second).
S MX430B QuantumX precision bridge measurement
module. The module has 4 inputs and supports full
bridge SG-based transducers with an accuracy class
of 100 ppm.
To Next Page
Loading...
