HBM MX440B - Firmware Update Via Ethernet

Connecting individual QuantumX modules
Quantum
X
I3031-14.0 HBM: public 73
7.2.5 Firmware update via Ethernet
We recommend that the firmware and software used to
operate QuantumX are always kept up to date.
S Download the latest firmware from the HBM website.
If you do not work with catman
®
, please download the
QuantumX software package from the HBM website.
Please save the firmware under ...\HBM\cat
manEasy\Firmware\QuantumXB, or on C:\Temp.
S Start catman
®
, scan the network for modules and
carry out the recommended firmware update. catman
comes with the firmware included. This is usually
stored under:
C:\Program Files\HBM\catman\Firmware\Quan
tumXB
If you do not work with catman
®
, please install the
free MX Assistant, connect to the modules, and use it
to perform the update. If the modules have a firmware
version < 2.21, you should install the QuantumX Firm
ware Updater tool, and use it to bring all the modules
up to date. From firmware version > 4.0, a firmware
update can also be performed with the MX Assistant,
or with catman.