Modules and transducers
Quantum
X
I3031-14.0 HBM: public 107
Red No sensor connected
Channel error (incorrectly parameterized, connection error,
invalid TEDS data)
Red Sensor supply overload
Analog output LEDs
Green Error-free operation
Orange System is not ready, boot procedure running
Red
Orange
Red
Overcurrent at the analog output
Input signal overflow
Overflow due to invalid scaling of the analog outputs
General rule: Brief flashing TEDS identified (green: is used,
orange: is not used).
8.5 MX430B Strain gage fullbridge
measuring amplifier
You can connect up to four transducers to the universal
amplifier MX430B. The transducers are connected via
15-pin D-SUB-15HD device connectors. All measuring
channels are electrically isolated from one another and
from the power supply.
MX430B connectable transducers
Transducer type Connection sockets See page
SG full bridge 1 ... 4 138
To Next Page
Loading...
