Need help?Do you have a question about the HBM QuantumX MX410 and is the answer not in the manual?
General| Brand | HBM |
|---|---|
| Model | QuantumX MX410 |
| Category | Control Unit |
| Language | English |
Details the intended use of the module and safety regulations.
Lists general safety rules for operating the module and connected equipment.
Highlights dangers arising from improper installation or operation by untrained personnel.
Discusses residual dangers and the need for safety engineering considerations.
States that modules must not be modified without express agreement and outlines repair restrictions.
Defines qualified personnel and their responsibilities for installation and operation.
Details methods for synchronizing QuantumX modules via FireWire, CX27, EtherCAT, and NTP.
Describes the functions of the QuantumX Assistant software for system and module configuration.
Details the connections and fuse assignments for the BPX001 backplane.
Explains the sequence for mounting modules onto the backplane.
Details connecting the DC supply voltage to QuantumX modules and power consumption.
Explains how to establish a single Ethernet connection between a PC and a QuantumX module.
Provides settings for direct Ethernet connection with a PC, including IP address configuration.
Details general information and setup for connecting QuantumX modules via FireWire.
Guides on updating module firmware via Ethernet using QuantumX Assistant.
Details the adjustable sensor supply voltage (5-24V) and power consumption limits.
Explains Transducer Electronic Data Sheet (TEDS) technology for transducer identification and configuration.
Describes the Auto Cal/Auto Adjustment function for improving long-term stability.
Introduces the MX840 universal amplifier and lists connectable transducers.
Provides the pin assignment for the MX840 connection plug.
Explains the system and connection LED status indicators for the MX840 amplifier.
Details the MX840A universal amplifier and its connectable transducers.
Provides the pin assignment for the MX840A connection plug.
Explains the system and connection LED status indicators for the MX840A amplifier.
Introduces the MX410 amplifier and lists its connectable transducers.
Provides the pin assignment for the MX410 connection plug.
Explains the status LEDs for the MX410 amplifier.
Introduces the MX460 amplifier and lists its connectable transducers.
To Next Page
