HBM T40FH - English; Table of Contents

2 A4429-3.0 HBM: public T40FH
English
1 Safety instructions 4........................................
2 Markings used 10............................................
2.1 Symbols on the transducer 10..................................
2.2 The markings used in this document 11..........................
3 Application 12...............................................
4 Structure and mode of operation 13...........................
5 Mechanical installation 15....................................
5.1 Important precautions during installation 15......................
5.2 Conditions on site 16..........................................
5.3 Mounting position 16..........................................
5.4 Installation options 17.........................................
5.4.1 Installation with antenna ring removed 18........................
5.5 Preparing for the rotor mounting 19.............................
5.6 Mounting the rotor 22..........................................
5.7 Installing the stator 25.........................................
5.8 Rotational speed measuring system 29..........................
6 Electrical connection 31......................................
6.1 General information 31........................................
6.2 EMC protection 31............................................
6.3 Connector pin assignment Option 4, Code SU2, DU2, HU2 32....
6.4 Connector pin assignment Option 3, Code PNJ 37................
6.5 Supply voltage (SU2, DU2, HU2) 37.............................
6.6 Supply voltage (Option 3, Code PNJ) 38.........................
7 TEDS transducer identification (Option 3, Code PNJ) 39.......
7.1 Hierarchy of user rights 39.....................................
7.1.1 Standard rights (USR level) 39.................................
7.1.2 Calibration rights (CAL level) 39................................
7.1.3 Administrator rights (ID level) 39................................
7.2 Contents of the TEDS memory as defined in IEEE 1451.4 40.......